Adaptec ANA-62022 User Guide - Page 93
System Status Data, ACTIVE
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Duralink64 Drivers for NetWare screen. This program opens automatically whenever you restart the server. To manually enter the Status screen, at the system prompt type: load status System Status Data s Adaptec NIC model number. s Total Kilobits/sec transmitted per port (Standalone and Group). Total Kilobits/sec transmitted per group. The Kilobits/sec sum of aggregated ports in a group equals the total Kilobits/sec transmitted by their group. s Percentage of transmit load carried by each port in a loadbalancing group. The percentage for a standalone port is always 100 percent. The percentage for a group is calculated as a percentage of bytes transmitted by the port over bytes transmitted by the group for a fixed period of time. (Use F8 to adjust time intervals.) s The present status of all ports and groups. - DOWN is displayed when a link is down. - ACTIVE is displayed when the link is up and has transmitted data within the established time interval. - IDLE is displayed when the link is up, but the port has not transmitted any data within the established time interval. s Speed of active ports and groups. 5-13