Adaptec ANA-62022 User Guide - Page 56
Configuring the Ports in WindowsNT4.0, In the New Adaptec NIC Ports Available window, available
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Duralink64 Configurations for Windows Configuring the Ports in Windows NT 4.0 In the Adaptec New Hardware Found window, each port is assigned to Autodetect, the default connection type that always detects port connection and negotiates a compatible speed and transmission mode. To configure the ports in Windows NT 4.0, follow these steps: 1 In the Adaptec New Hardware Found window, make sure all the DuraLAN NIC ports appear. Note: Generally, PCI Bus 0 is the PCI Bus on the motherboard. For example, PCI Bus 1 or above is an ANA-6x022 or ANA-6x044 NIC. The PCI Slot represents the port on the NIC starting from the top. The top port starts at PCI Slot 4. 2 In the New Adaptec NIC Ports Available window, available Adaptec ports are listed. Select the appropriate port, and click Apply. 3 From the Connection Types: drop-down list, select and click the connection type for your network-or select Autodetect Default Connection. The connection type will automatically be applied to the list of Ports below the Connection Type area. For descriptions, see Connection Types on page A-2. 4 Repeat Steps 2 and 3 for each existing port. 5 When you are done, click OK. 4-7