Adaptec ANA-62022 User Guide - Page 61
Autodetect, Default Connection, Apply, In the New Adaptec NIC Ports Available list, select
![]() |
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
DuraLAN Fast Ethernet NICs User's Guide To configure the ports in Windows NT 4.0, follow these steps: 1 In the Adaptec New Hardware Found window, make sure all the DuraLAN NIC ports appear. Note: Generally, PCI Bus 0 is the PCI Bus on the motherboard. For example, PCI Bus 1 or above is an ANA-62022 or ANA-62044 NIC. The PCI Slot represents the port on the NIC starting from the top. The top port starts at PCI Slot 4. 2 In the New Adaptec NIC Ports Available list, select the appropriate port. 3 In this same field under the Connection Types: heading, click the connection type for your network or use Autodetect Default Connection. For descriptions, see Connection Types on page A-2. 4 From the Connection Types: drop-down list, select and click the connection type for your network-or select Autodetect Default Connection. The connection type will automatically be applied to the list of Ports below the Connection Types: area. For descriptions, see Connection Types on page A-2. 5 Click Apply. 6 Repeat Steps 2 through 4 for each existing port. 7 When you are done, click OK. 4-12
![](/manual_guide/products/adaptec-ana62022-user-guide-754ab88/61.png)