Adaptec ANA-62022 User Guide - Page 65
Assigning the TCP/IP Address, Assigning TCP/IP Address for Windows 2000/XP
![]() |
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
DuraLAN Fast Ethernet NICs User's Guide 4 Repeat Step 3 for each additional port. Note: We recommend that the same connection type be assigned to each port in the same group. 5 OPTIONAL. To remove a port from the group, click the appropriate port from the Group Ports box, and click Remove. 6 When you are finished configuring the group, click Apply. 7 To create another group, repeat Steps 1 through 6. 8 To rename a group: a Select the first group name in the Group(s) list box. b Type the new name. c Click Apply. 9 When you are finished configuring all groups, click OK. 10 If SNMP is not set up on the computer, you will receive the Setup Message below. Ignore the message, and click OK. 11 In the Network window, click Close. To assign TCP/IP addresses to your ports, refer to Assigning the TCP/IP Address on page 4-16. Assigning the TCP/IP Address Assigning TCP/IP Address for Windows 2000/XP Once you have configured DuraLAN Failover, Port Aggregation, or FEC, you need to assign IP addresses to your primary ports. To identify the primary port for Link Aggregation Type (Failover, Port Aggregation, or FEC), follow these steps: 1 Click on Start. 4-16
![](/manual_guide/products/adaptec-ana62022-user-guide-754ab88/65.png)