Adaptec ANA-62022 User Guide - Page 91

Enter, Enter IP Address, Enter Subnet Mask, The IP Address box appears.

Get Adaptec ANA-62022 - Duo 64 Enet PCI 10/100MBs 10/100 BT PDF manuals and user guides
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

Duralink64 Drivers for NetWare 5 To assign an IP protocol, follow these steps: a In the List of Frame Types box, select the frame type, and press Enter. b In the IP Parameters box, select Enter IP Address, and press Enter. The IP Address box appears. c In the IP Address box, type the IP address number, and press Enter. d In the IP Parameters box, select Enter Subnet Mask, and press Enter. e In the Subnet Mask box, type the corresponding subnet mask, and press Enter. f Press Esc. g Repeat Steps a through f for each appropriate port or pair. h Press Esc until you return to the List of Ports/Failover Pairs box. 6 Repeat Steps 1 through 5 for any other Groups you wish to configure. 7 Press Esc until you return to the Main Menu. As an example, following are the overlapping dialog boxes viewed while assigning the protocols in NetWare. 5-11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
5-11
Duralink64 Drivers for NetWare
5
To assign an IP protocol, follow these steps:
a
In the List of Frame Types box, select the frame type, and
press
Enter
.
b
In the IP Parameters box, select
Enter IP Address
, and press
Enter
. The IP Address box appears.
c
In the IP Address box, type the IP address number, and
press
Enter
.
d
In the IP Parameters box, select
Enter Subnet Mask
, and
press
Enter
.
e
In the Subnet Mask box, type the corresponding subnet
mask, and press
Enter
.
f
Press
Esc
.
g
Repeat Steps a through f for each appropriate port or pair.
h
Press
Esc
until you return to the List of Ports/Failover Pairs
box.
6
Repeat Steps 1 through 5 for any other Groups you wish to
configure.
7
Press
Esc
until you return to the Main Menu.
As an example, following are the overlapping dialog boxes viewed
while assigning the protocols in NetWare.