Adaptec ANA-62022 User Guide - Page 97
Selecting Options, Editing startnet.bat
![]() |
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
DuraLAN Fast Ethernet NICs User's Guide Selecting Options This section provides the option you must select in a given screen. These screens vary depending on which NetWare Client32 package you are using. Screen Name/Message Client Installation Driver Type 32-Bit Network Board Drivers When asked to insert the NetWare Client32 for DOS/Windows 3.1x 32-bit CD 32-Bit Network Board Drivers Settings for Adaptec DuraLAN Network Adapter Option Select either NetWare Client32 for DOS and Windows 3.1x or IntraNetWare DOS/ Windows for DOS/Windows. Select 32-Bit. Select User Specified 32 Bit Driver. Do not choose Adaptec PCI Ethernet Driver Failover. Insert the Duralink64 driver for NetWare (CD), and type a:\nwserver. Select Adaptec DuraLAN Network Adapters. Set IOMAP to 1. Set Connection Type to Autodetect Default or None. Editing startnet.bat To assign multiple ports, follow these steps: 1 Load c:\novell\client32\adptsf.lan. 2 In startnet.bat, type slot=[port slot number] at the end of each line. The following example shows the setting assigned to port 1: iomap=1 frame=ETHERNET_802.2 slot=1 3 For the next port, type iomap=1 frame=[frame type] slot=[port slot number] To assign multiple frame types, repeat this step, changing the frame type setting. 4 Repeat Step 3 for each additional port. 6-2
![](/manual_guide/products/adaptec-ana62022-user-guide-754ab88/97.png)