Adaptec ANA-62022 User Guide - Page 98
Connecting Clients to the NetWare Server, Installing Novell Client32 for Windows
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Installing Duralink64 Novell Client 5 Save your changes. 6 Exit startnet.bat. Connecting Clients to the NetWare Server Connecting clients to the NetWare Duralink64 server requires the NDIS driver. Do not use an ODI driver (see Connecting Clients to the NetWare SA, FO, PA, or FEC Server on page 6-4). Installing Novell Client32 for Windows This section describes how to install the Adptsf 32-bit driver for Novell Client32. Please note that Adaptec does not support 16-bit drivers. Note: This procedure requires the NDIS driver with Client32. Do not use an ODI driver. 1 If you are using Windows NT 4.0, install the latest Microsoft service packs that are available for the Windows OS. Then restart the system. 2 Install the DuraLAN Standalone driver. Instructions are provided in Installing the Duralink64 Driver during NetWare 6.0/ 5.x OS Installation on page 5-5. 3 Install the Client32 software, see your Novell documentation for instructions. Connecting Clients to the NetWare Server Connecting clients to the NetWare Duralink64 server requires the NDIS driver. Do not use an ODI driver. See the appropriate section: s Installing the NetWare Driver after OS Installation on page 5-6. s Installing the NetWare Port Aggregation and Failover Drivers on page 5-7. 6-3