Adaptec ANA-62022 User Guide - Page 63
Connection Type, Receive Buffers, and so on., For Cisco's FEC, see
![]() |
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
DuraLAN Fast Ethernet NICs User's Guide 3 In the Group(s) field, click Create New Group, and type the new group name. Note: The group name can be up to 20 characters. If you skip this step, the system assigns a default group name (GroupX). 4 In the Link Aggregation Type field, click the appropriate link type (in this procedure, click either Adaptec's Port Aggregation or Cisco's Fast EtherChannel). In the example in Step 2, Adaptec's Port Aggregation is selected in this field. For a brief description of Adaptec's Port Aggregation, see Duralink64 Port Aggregation on page 1-9. For Cisco's FEC, see FEC (Fast EtherChannel) on page 1-10. 5 From the Available Adaptec Ports box, select the available port you want to add to the group, and click Add. 6 Repeat Step 5 for each additional port. Note: We recommend that all ports in the same group be assigned the same Properties and Values (that is, Connection Type, Receive Buffers, and so on). 7 OPTIONAL. To remove a port from the group, select the appropriate port from the Group Ports box, and click Remove. 8 When you are finished configuring the group, click Apply. 9 To create another group, repeat Steps 3 through 8. 10 To rename a group: a Select the group name in the Group(s) list box. b Type the new name. c Click Apply. 11 When you are finished configuring all groups, click OK. To assign TCP/IP addresses to your ports, refer to Assigning the TCP/IP Address on page 4-16. 4-14
![](/manual_guide/products/adaptec-ana62022-user-guide-754ab88/63.png)