Adaptec ANA-62022 User Guide - Page 85
Installing the Duralink64 Driver during NetWare6.0/5.x OS Installation
![]() |
UPC - 760884132333
View all Adaptec ANA-62022 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Duralink64 Drivers for NetWare Installing the Duralink64 Driver during NetWare 6.0/5.x OS Installation The procedures for installing NetWare 6.0, 5.1, and 5.0 are the same. The Duralink64 driver is embedded only in the NetWare 5.1 installation CD. Follow this procedure when installing the Duralink64 driver during the installation of NetWare 6.0/5.x. Install NetWare following the NetWare on-screen instructions until you reach the Network Boards screen. Note: If you are using the ANA-62011LV, ANA-64022LV, or ANA-64044LV NIC with NetWare 5.1, you must use the driver that came with the NIC. Do not use the driver embedded with NetWare 5.1. 1 Copy the NetWare driver files from the Duralink64 driver CD to a floppy disk before installing the drivers onto the server. Do not attempt to install Novell drivers from the CD during the OS installation. a On a separate Windows PC, insert the Duralink64 driver CD into the CD-ROM drive and a blank DOS-formatted floppy disk into the floppy disk drive. b Open the CD in Windows Explorer and double-click the nwserver directory (in the root of the CD). c Select the entire contents of the nwserver directory, and copy it to the floppy disk. d The floppy disk now contains the Duralink64 driver files and can be used to install drivers onto your NetWare server. 2 From the Network Boards window select Modify, and press Enter. 3 Select the Network Boards field, and press Enter. 4 If you are installing NetWare 5.x and are using the ANA-62011LV, ANA-64022LV, or ANA-64044LV NIC, you must remove the adptsf.lan driver that was autodetected and listed. Press Delete to remove the embedded driver. 5-5
![](/manual_guide/products/adaptec-ana62022-user-guide-754ab88/85.png)