Alesis Strike MultiPad User Guide - Page 16

Group Press the F5-Group button to edit the pad group settings. Parameter Sync Group Sync Mode Description This setting allows you to trigger multiple pads Each kit can have up to 16 Sync Groups. This setting determines how pads in the same Sync Group are triggered. Values/Settings Off, 1-16 Mute: Pads that share a Sync Group will mute each other when triggered. Cycle: Pads in the Sync Group will be triggered in consecutive order, from P1-9, to T1-6, to FS1-4. This is similar to a "round robin" function. Random: Pads in the Sync Group will be triggered in random order. Together: Up to 9 pads in the group will play at the same time. Copy Press the F6-Copy button to open the Pad Copy menu. In this menu, you can perform the following functions: • Copy Selected Pad: Copies the currently selected pad, highlighted to the left. • Paste With Selected Pad: Pastes the copied pad (shown above) to the currently selected pad. To copy a pad: 1. Hit or select the pad you would like to copy. 2. Use the Main Encoder to highlight Copy Selected Pad and press it to select. The Kit and Pad information of the copied pad will be displayed. 3. Hit or select the pad where you want to paste the copied pad. You can select any pad from any kit and the copied pad will be remembered until another pad is copied or Strike Multipad is powered off. 4. Use the Main Encoder to highlight Paste With Selected Pad and press it to select. The copied pad will be pasted to the selected pad, and a confirmation window will appear for two seconds. You can continue to copy the same pad, or start over by copying a new pad. 16