Alpine ICS-X7HD Owner's Manual (english) - Page 20

Setup Audio Setup Audio Setup Operation To display the Audio Setup Menu screen: Your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below. 1 Bring your vehicle to a complete stop at a safe location. Engage the parking brake. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. • For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the Setup operation has been released. Engaging the parking brake can reactivate the Audio Setup Menu, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the Audio Setup Menu screen." Each time the ignition is turned OFF, perform the procedure of "To display the Audio Setup Menu screen." The following steps 1 to 5 are common operations to each "Setting item" of Audio Setup. Refer to each section for details. 1 Touch [Setup] on the Home screen. The Setup main screen is displayed. 2 Touch [Audio Setup]. The Audio Setup screen appears. 3 Select the desired item. If " " appears, there is next hierarchy. Touch the desired item. If " " does not appear, proceed to step 4. Setting items: Balance/Fader/Subwoofer / Application Volume Setup / Media Xpander / Bass Max EQ / Download Sound Setting / Defeat / Time Correction / X-OVER / Parametric EQ 4 Touch [ ] or [ ] etc., to change its setting. 5 Touch [ ] to return to the main application screen. Touch [ ] to return to the previous screen. • Immediately after changing the Audio Setup (while the system is writing data automatically) do not turn the ignition key to OFF. Otherwise, the settings may not be changed. • For details on how to scroll through the list, refer to "Selecting an Item in a List" (page 16). Setting the Balance/Fader/Subwoofer [Balance/Fader/Subwoofer] is selected on the Audio setup menu in step 3. Refer to "Audio Setup Operation" (page 20). Image area Adjusting the Balance/Fader Touch the desired point within the image area. Or touch [ Front] [ Rear] [ Left] [Right ]. Balance: L15 to R15 Fader: F15 to R15 • To reset to the initial setting (Balance: 0, Fader: 0), touch [Center]. Turning Subwoofer ON/OFF If an optional subwoofer is connected to the unit, make the following setting. Setting item: SubW. Setting contents: On / Off (Initial setting: Off) Adjusting the Subwoofer Level You can set the Subwoofer level when a Subwoofer is connected. Setting item: SubW. LEVEL Setting contents: 0 to 15 (Initial setting: 0) • If the Subwoofer setting is "Off," the setting cannot be set. Setting the Subwoofer Phase The subwoofer output phase is toggled Subwoofer Normal (0°) or Subwoofer Reverse (180°). Setting item: SubW. Phase Setting contents: 0° / 180° (Initial setting: 0°) • If the Subwoofer setting is "Off," the setting cannot be set. 20-EN