Alpine ICS-X7HD Owner's Manual (english) - Page 49
Other Camera Operation, Calibration when Connected to HCE, C305R
View all Alpine ICS-X7HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
When there is a steep downward slope behind the car (example) Other Camera Operation Set "OTHER" for "AUX Camera" (page 32). 1 Press the Home button. The Home screen is displayed. 2 Touch [Other Camera]. About the Adjustment of the Caution Display Location The Caution display location for other cameras can be adjusted. Refer to "Adjusting the Caution Display Location" (page 47) for the operations. Error Error In the case of a downward slope behind the car, the distance guides are displayed farther from the rear bumper than the actual distance. If there is an obstacle on the downward slope, it seems closer than its actual position. Also, an error may occur between the guidance and the actual path of the car on the road surface. Calibration when Connected to HCEC305R Obstacle detection performance adjustment and guidance mark settings of HCE-C305R (ACTIVE VIEW™ REAR CAMERA SYSTEM) require that camera installation information be entered and calibration performed. If camera information is not entered, accurate detection will not be possible, so be sure to perform calibration. For details on calibration, refer to "Calibration" in the owner's manual of HCEC305R. To perform calibration with the supplied switch, refer to "Performing Calibration" in the owner's manual of HCE-C305R. When connected to this unit, you can perform operations via the screen of this unit. About the Camera Settings Before performing calibration, set the camera. Set "AUX Camera" to "Rear." Refer to "Setting the Camera Input" (page 32). 49-EN