Alpine ICS-X7HD Owner's Manual (english) - Page 58

USB Video Playback Display example for the USB Video main screen Simple mode Info mode File no. Total file no. Information display Title name/Artist name/Audio signal output/Subtitle Elapsed time Audio Setup button (see "Audio Setup Operation" on page 20) Display Setup button (see "Display Setup Operation" on page 25) WARNING It is dangerous for the driver to watch the USB Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur. Install the ICS-X7HD correctly so that the driver cannot watch USB Video unless the vehicle is stopped and the emergency brake is applied. If the ICS-X7HD is not installed correctly, the driver will be able to watch the USB Video while driving the vehicle and may be distracted from looking ahead causing an accident. The driver or other people could be severely injured. Caution • If you switch the power or Ignition key OFF or change sources during playback, playback will continue where you left off when you resume playback. • If you try to perform an invalid operation, the following mark is displayed on the monitor screen: 1 Press the Home button. The Home screen is displayed. 2 Touch [USB]. The display shows the USB Video mode screen. The unit starts to play the USB Video. • Refer also to "About DivX®" (page 60). • While reading a DivX® file, the fast-forwarding/fast-reversing and repeat functions, etc. cannot be used. • A DivX® file that exceeds 4GB cannot be played back. Stopping Playback (PRE STOP) Touch the stop button during playback to stop playback. That position is stored in the memory. 1 Touch [ ] during playback. " " indicator is displayed. 2 Press Media Control button 2 ( / ) in the PRE STOP mode. Playback starts from the position at which it was stopped. 58-EN