Brother International ADS-2800W Users Guide - Page 210
Carrier Sheet
View all Brother International ADS-2800W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
Scan Using the Control Panel Setting Brightness Contrast Description Applicable Feature Image OCR E-mail File Adjust the setting (-50 to 50) to get the best image. The Yes Yes Yes Yes default value of 0 represents an average and is suitable for most images. Set the Brightness level by dragging the slider to the right or left to lighten or darken the image. You can also enter a value in the box to set the level. If the scanned image is too light, set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness level and scan the document again. Adjust the setting (-50 to 50) to get the best image. The Yes Yes Yes Yes default value of 0 represents an average and is suitable for most images. Increase or decrease the contrast level by moving the slider to the right or left. An increase emphasizes dark and light areas of the image, while a decrease reveals more details in gray areas. You can also enter a value in the box to set the Contrast. NOTE 7 The Contrast setting is only available when setting Scan Type to Auto, Gray (Error Diffusion), True Gray or 24bit Color. Default Carrier Sheet Mode Restore all settings to their factory default values. Yes Yes Yes Yes Scan the following documents using the Carrier Sheet. Yes Yes Yes Yes For this mode, select any setting other than Auto from the Document Size drop-down list. Large-sized Documents (A3, B4 and Ledger) Fold the document in half and insert it in the Carrier Sheet for 2-sided (duplex) scanning, then both front and back pages will be combined into a single page. Select 2 in 1(A4) for an A3 document, 2 in 1(B5) for a B4 document or 2 in 1(Letter) for a Ledger document from the Document Size drop-down list. Important documents (photos, contracts) Thin paper (receipts) Irregularly-shaped paper (clippings) NOTE • Load only one Carrier Sheet at a time. • Insert the document in the center of the Carrier Sheet and align the top of the document with the top of the Carrier Sheet. 194