Brother International ADS-2800W Users Guide - Page 52

General Information Automatic Daylight Saving Time 1 You can program the machine to change automatically for Daylight Saving Time. It will reset itself forward 1 one hour in the spring and backward one hour in the fall. Make sure you have set the correct date and time in the Date & Time setting. Set Automatic Daylight Saving Time to On as follows: 1 Press (All Settings). 2 Press a or b to display Initial Setup. 3 Press Initial Setup. 4 Press Date & Time. 5 Press Auto Daylight. 6 Press On. 7 Press . Sleep Time 1 The Sleep Time setting can reduce power consumption. When the machine is in Sleep Time, it acts as though it is turned off. Enter how long the machine must remain idle before it enters Sleep Time. The maximum setting is 90 Mins and the default setting is 10 Mins. The timer will restart if any operation is carried out on the machine. 1 Press (All Settings). 2 Press General Setup. 3 Press Ecology. 4 Press Sleep Time. 5 Enter the length of time the machine is idle before entering Sleep Time. 6 Press OK. 7 Press . 36