Brother International MFC 8890DW Service Manual - Page 399
Details of Firmware Switches, <Operating Procedure>, Stop/Exit
UPC - 012502622673
View all Brother International MFC 8890DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
(1) Press the [1] and [0] keys in this order in the initial stage of the maintenance mode. The machine displays the "WSW00" on the LCD and becomes ready to accept a firmware switch number. (2) Enter the desired number from the firmware switch numbers (01 through 53). The following appears on the LCD: Selector 1 Selector 8 WSWXX = 0 0 0 0 0 0 0 0 (3) Enter a value to be set (0 or 1) using the [0] and [1] keys. (4) Press the [OK] button. This operation saves the newly entered selector values onto the EEPROM and readies the machine for accepting a firmware switch number. (5) Repeat steps (2) through (5) until the modification for the desired firmware switches is completed. (6) Press the [Stop/Exit] button to return the machine to the initial stage of the maintenance mode. Note: • To cancel this operation and return the machine to the initial stage of the maintenance mode during the above procedure, press the [Stop/Exit] button. • If there is a pause of more than one minute after a single-digit number is entered for double-digit firmware switch numbers, the machine will automatically return to the initial stage of the maintenance mode. ■ Details of Firmware Switches • The details of the firmware switches are described in APPENDIX 4 in which the useraccessible selectors of the firmware switches are shaded. • Machine w/o fax support some selectors of firmware switches. Those selector numbers are circled. 7-12 Confidential