Brother International MFC 8890DW Service Manual - Page 466

Selector No. Function Setting and Specifications 1 Not used. 2 Dialing during document reading 3 into the temporary memory in in- 0: Disable 1: Enable memory message transmission In the case of Selector 3=0 in WSW54. No. 4 5 0 0: 0.5 (A) 0 1: 1 (B) No. of CNG cycles to be detected 1 0: 1.5 (C) 4 5 (when the line is connected via the external telephone except in the external TAD mode or via the 1 1: 2 (D) In the case of Selector 3=1 in WSW54. built-in telephone) No. 4 5 0 0: 2.5 (A) 0 1: 3 (B) 1 0: 3.5 (C) 1 1: 4 (D) In the case of Selector 6=0 in WSW58. No. 6 7 0 0: 0.5 (A) No. of CNG cycles to be detected 0 1: 1 (B) (when the line is connected via 1 0: 1.5 (C) 6 7 the external telephone in the external TAD mode, via the builtin telephone in the TAD mode, or 1 1: 2 (D) In the case of Selector 6=1 in WSW58. via the machine in the automatic No. 6 7 reception of the F/T mode) 0 0: 2.5 (A) 0 1: 3 (B) 1 0: 3.5 (C) 1 1: 4 (D) 8 Not used. • Selector 3: Dialing during document reading into the temporary memory in inmemory message transmission If this selector is set to "0," the machine waits for document reading into the memory to complete and then starts dialing. This enables the machine to list the total number of pages in the header of the facsimile message. • Selectors 4 and 5: No. of CNG cycles to be detected (when the line is connected via the external telephone except in the external TAD mode or via the built-in telephone) The machine interprets a CNG as an effective signal if it detects the CNG by the number of cycles specified by these selectors when the line is connected via the external telephone except in the external TAD mode or via the built-in telephone. App. 1-32 Confidential