Brother International MFC 8890DW Service Manual - Page 82

Error codes Problem Refer Error to: codes Problem Refer to: Fax paper setting mismatch 7F (The setting paper bexomes besides the A4/Letter/Legal/ Folio) (Not applicable) Scanning color parameter 3-23 A8 matching miss 3-30 Fax paper size is incorrect (The DMA transfer error 80 paper is smaller 10mm than the letter size (11inch) in Fax List/ 3-23 AD Report) 3-31 Discharge detection error (Unable CCD unit home position sensor to print after the discharge is not turned on. detection error until Drum Unit is 83 replaced.) (Discharge detection error occurs when the machine 3-23 AE 3-31 detects the drum discharge with Drum life reaches more than twice the standard Drum Life.) 84 Paper jam 3-24 AF CCD unit home position sensor is not turned off. 3-31 85 Tray 1 is not installed into the machine 3-24 B0 Scanning FFC detection error 3-32 86 Tray 2 is not installed into the machine 3-24 B1 Dark level offset data level error for scanning 3-32 88 Paper jam inside the machine 3-25 B2 Gain control data level error for scanning 3-32 89 Incorrect paper size in duplex printing 3-25 B7 A/D converter standard voltage failure; at High side 3-32 8A Paper jam in Tray 1 3-26 B8 A/D converter standard voltage failure; at Low side 3-32 8B Paper jam in Tray 2 3-26 B9 Scanning light adjustment error is detected 3-33 8C Paper jam in MP Tray 3-26 BB White level data error 3-33 8D Paper jam near eject tray 3-27 BD Black level data error 3-33 Specified paper size is not 99 supported for duplex printing (DX) ADF duplex scanning cannot be 3-27 BF implemented due to too long 3-33 document 9D Not used C0 New toner detection lever failure 3-34 9F Paper empty 3-28 C7 Run out of memory for data expansion of PC printer 3-34 A1 Front cover opened 3-28 C8 Secure print data full 3-34 A2 During scanning, 90 cm or longer of a document is detected 3-29 C9 DIMM error 3-35 Document rear sensor is not A3 turned on when feeding the document Excess current to USB device 3-29 CA 3-35 A4 ADF cover opened (Not applicable) 3-29 CD Drum unit is not installed into the machine 3-35 A5 Fax scanning error (Warning) 3-30 D1 Modem initialization failed 3-36 Fax scanning error (Error) A6 Fuser error other than 58, 59, 3-30 DD 68, 69, 6A, 6B, 6C, 6D, 6E, 6F, 3-36 76, 78, DE and E2 are occurred Scanning color parameter file A7 failure Central temperature of heat 3-30 DE roller detected the temperature 3-36 that was lower than edge (60?C) 3-10 Confidential