Brother International MFC-J280W Users Manual - English - Page 96
Stop/Exit
View all Brother International MFC-J280W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
IMPORTANT • If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper. • If the print head is in the right corner as shown in the illustration, you cannot move it. Re-connect the power cord. Hold down Stop/Exit until the print head moves to the center. Then unplug the machine from the power source and take out the paper. k Push the two green levers back to the original positions. • If ink gets on your skin or clothing immediately wash it off with soap or detergent. j Using both hands, grasp the plastic tabs on both sides of the machine and gently close the scanner cover. l Push the paper tray firmly back into the machine. m While holding the paper tray in place, pull out the paper support until it clicks, and then unfold the paper support flap. Make sure you pull out the paper support until it clicks. IMPORTANT DO NOT use the paper support flap for Legal size paper. n Re-connect the power cord. 82