Brother International MFC-J835DW Advanced Users Manual - English - Page 62
How to set a new default, How to reset to the factory settings,
View all Brother International MFC-J835DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 8 Note • Auto Crop is available for paper with right angles of 90 degrees at all four corners. If one of the angles is not square, Auto Crop cannot detect the document. • If your document is too long or wide, this setting does not work properly. • You must place the documents away from the edges of the scanner glass as shown in the illustration. • You must place the documents at least 0.4 in. (10 mm) apart from each other. • Auto Crop adjusts the skew of the document on the scanner glass, but if your document is skewed more than 10 degrees, this setting will not work. • The ADF must be empty to use the Auto Crop. • The Auto Crop feature is available for up to a maximum of 16 documents depending on the size of your documents. IMPORTANT DO NOT take out the memory card or USB Flash memory drive while the status LED is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them. How to set a new default 8 You can save the Scan to Media settings (Quality, File Type and Auto Crop) you use most often by setting them as the default settings. These settings will stay until you change them again. a Press (SCAN). b Press d or c to display to Media. c Press to Media. d Press d or c to display Set New Default. e Press Set New Default. f Press Yes to confirm. g Press Stop/Exit. How to reset to the factory settings 8 You can restore all the Scan to Media settings (Quality, File Type and Auto Crop), that you have changed, to the factory settings. a Press (SCAN). b Press d or c to display to Media. c Press to Media. d Press d or c to choose Factory Reset. e Press Factory Reset. f Press Yes to confirm. g Press Stop/Exit. 56