Canon Color imageCLASS MF9280Cdn imageCLASS MF9280Cdn/MF9220Cdn Starter Guide - Page 7
long gently by hooking your finger into the, Remove the sealing tape approx. 18 7/8 inch
View all Canon Color imageCLASS MF9280Cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 Settings Necessary to Use the Machines Functions 8 Hold the blue tabs on the both sides of toner cartridge, and pull it horizontally. 10 Place the toner cartridge on a flat surface, fold back the tab of the sealing tape (A) located at left side of the toner cartridge. - Do not open the drum protective shutter (A). 11 Remove the sealing tape (approx. 18 7/8 inch long) gently by hooking your finger into the tab and pulling it out straight in the direction of the arrow. - Do not touch the high-voltage contact (A) or the electrical contacts (B), as this may result in damage to the printer. 9 Gently rock the toner cartridge 5 or 6 times to evenly distribute the toner inside. - If toner is adhered to the removed seal, be careful not to dirty your hands or clothing by touching it. - If your hands or clothes get dirty from touching the toner, wash them immediately in cold water. Do not use hot water. Doing so may cause the toner to set permanently. 12 Hook your finger into the tab and remove the packing material (A) located at right side of the toner cartridge. If toner is not distributed evenly, this may result in deterioration in print quality. Make sure to carry out this procedure properly.