Canon DC420 DC410/DC420 Instruction Manual - Page 25
Inserting and Removing a Disc
View all Canon DC420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
- To allow the subject to monitor the LCD screen while you use the viewfinder. - To include yourself in the picture when recording with the self timer. 180° NOTES • This setting does not affect the brightness of the recordings. • Using the bright setting will shorten the effective usage time of the battery pack. Inserting and Removing a Disc Subject can monitor the LCD screen NOTES About the LCD and viewfinder screen: The screens are produced using extremely high-precision manufacturing techniques, with more than 99.99% of the pixels operating to specification. Less than 0.01% of the pixels may occasionally misfire or appear as black, red, blue or green dots. This has no effect on the recorded image and does not constitute a malfunction. LCD Backlight You can set the brightness of the LCD screen to normal or bright. Use only 8 cm (3 in.) mini DVD discs marked with the DVD-R logo (including DVD-R DL) or the DVD-RW logo. Refer also to Approved discs ( 7). Before inserting the disc, be sure to check that the recording surface is clean. If necessary, use a soft lens- cleaning cloth to remove any fingerprints, dirt buildup or smudges from the disc surface. Inserting the Disc ( 21) Hold DISP. pressed down for more than 2 seconds. Repeat this action to toggle between the normal and bright settings. Pick up lens 1 Move the / switch to (movies). 2 Turn the switch to ON to set the camcorder in mode. Preparations • 25