Canon DR-7080C User Manual - Page 53
Align the edges of the document stack on a flat surface, and then, load the stack into the feeder
View all Canon DR-7080C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
4.2 Placing Documents onto the Scanner 2 Align the edges of the document stack on a flat surface, and then load the stack into the feeder with the scanning side facing upwards. Insert the stack into the feeder as far as it will go, until the document set indicator lights. Document Set Indicator ● Make sure the top of the document stack is not higher than the load limitation mark. 4 Important Overloading the feeder can cause jamming. ● The feeder is designed to hold approximately 100 sheets of LTR/A4-size standard copy paper (20 lb bond or 80g/m2). Load Limitation Mark ● When scanning NCR paper that is 11" x 17"/A3 or other large sizes, as well as paper that is very thin, the document may occasionally get caught in the paper eject mechanism. In this case, place some paper (auxiliary paper) in the document eject tray before scanning the document. Auxiliary Paper 49