Canon DR-7080C User Manual - Page 64
Setting the Event Function
View all Canon DR-7080C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Chapter 4 Using the Scanner 5 Place the document onto the scanner. See "Placing Documents onto the Scanner," on page 48 for information about placing Important documents onto the scanner. 6 Press the [Start] key. The image file is forwarded in accordance with the selected job. 7 When scanning of the document is complete, press the [Stop] key to exit the Job Mode. If you cannot get the Job Mode to operate correctly, see "Troubleshooting," on page 86. Note ◆ Setting the Event Function The Job function does not function when [DR7080C Job Tool] has not been specified in the scanner's Event function. Before using the Job function, set the scanner's event according to the following procedure. 1 Click the [Start] button, then click [Settings] - [Control Panel]. 60