Canon EOS 70D Operation Manual - Page 192
Press the <, > button., Focus the subject., Take the picture., FE Lock, > will light up.
View all Canon EOS 70D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
D Using the Built-in Flash A FE LockN FE (flash exposure) lock obtains and locks the appropriate flash exposure for the desired part of the subject as framed. 1 Press the button. X The built-in flash will rise. Press the shutter button halfway and look in the viewfinder to check that the icon is lit. 2 Focus the subject. 3 Press the button. (8) Aim the viewfinder center over the subject where you want to lock the flash exposure, then press the button. X The flash will fire a preflash and the required flash output is calculated and retained in memory. X In the viewfinder, "FEL" is displayed for a moment and will light up. Each time you press the button, a preflash is fired and the required flash output is calculated and retained in memory. 4 Take the picture. Compose the shot and press the shutter button completely. X The flash is fired when the picture is taken. If the subject is too far away and beyond the effective range of the flash, the icon will blink. Move closer to the subject and repeat steps 2 to 4. FE lock is not possible with Live View shooting. 192