Canon EOS 70D Operation Manual - Page 32
Open the cover., Remove the card., Make sure the access lamp is off
View all Canon EOS 70D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing and Removing the Card The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [z1: Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (p.408). Removing the Card Access lamp 1 Open the cover. Set the power switch to . Make sure the access lamp is off, then open the cover. If [Recording...] is displayed, close the cover. 2 Remove the card. To eject the card, gently push it in and then let go. Pull the card straight out, then close the cover. 32
Installing and Removing the Card
32
1
Open the cover.
Set the power switch to <
2
>.
Make sure the access lamp is off,
then open the cover.
If [
Recording...
] is displayed, close
the cover.
2
Remove the card.
To eject the card, gently push it in and
then let go.
Pull the card straight out, then close
the cover.
Removing the Card
The number of possible shots depends on the remaining capacity of the
card, image-recording quality, ISO speed, etc.
Setting [
z
1: Release shutter without card
] to [
Disable
] will prevent
you from forgetting to insert a card (p.408).
Access lamp