Canon EOS 70D Operation Manual - Page 374

3 Custom Function SettingsN C.Fn II -11 AF point display during focus You can set whether or not to display the AF point(s) in the following cases: 1. When selecting the AF point(s), 2. When the camera is ready to shoot (before AF operation), 3. During AF operation, and 4. When focus is achieved. 0: Selected (constant) The selected AF point(s) is always displayed. 1: All (constant) All 19 AF points are always displayed. 2: Selected (pre-AF, focused) The selected AF point(s) is displayed for 1, 2, and 4. 3: Selected (focused) The selected AF point(s) is displayed for 1 and 4. 4: Disable display For 2, 3, and 4, the selected AF point(s) will not be displayed. If [2: Selected (pre-AF, focused)] or [3: Selected (focused)] is set, the AF point will not be displayed even when focus is achieved with AI Servo AF. C.Fn II -12 VF display illumination The AF points and grid in the viewfinder can be illuminated in red when focus is achieved. 0: Auto The AF points and grid are automatically illuminated in red under low light. 1: Enable The AF points and grid are illuminated in red regardless of the ambient light level. 2: Disable The AF points and grid are not illuminated in red. When AI Servo AF is set, there is no illumination in red even when focus is achieved. The setting here is not applied to the electronic level display (before shooting) (p.67) in the viewfinder. When you press the or button, the AF points and grid will be illuminated in red regardless of this setting. 374