Canon EOS 70D Operation Manual - Page 373

3 Custom Function SettingsN C.Fn II -9 Orientation linked AF point You can set the AF area selection mode and manually-selected AF point separately for vertical shooting and horizontal shooting. 0: Same for both vertical/horizontal The same AF area selection mode and manually-selected AF point (or zone) are used for both vertical shooting and horizontal shooting. 1: Select separate AF points The AF area selection mode and manually-selected AF point (or zone) can be set separately for each camera orientation (1. Horizontal, 2. Vertical with the camera grip at the top, 3. Vertical with the camera grip at the bottom). Convenient when, for instance, you want to keep using the right AF point during all camera orientations. When you manually select the AF area selection mode and AF point (or zone) for each of the three camera orientations, they will be set for the respective orientation. Whenever you change the camera orientation, the camera will switch to the AF area selection mode and manually-selected AF point (or zone) set for that orientation. C.Fn II -10 Manual AF point selection pattern During manual AF point selection, the selection can either stop at the outer edge or it can move to the opposite AF point. This works with single-point AF (manual selection) and 19-point automatic selection AF with AI Servo AF. 0: Stops at AF area edges Convenient if you often use an AF point along the edge. 1: Continuous Instead of stopping at the outer edge, the selected AF point continues to the opposite side. 373