Canon MAXIFY MB5420 MB5400 series PDF User Manual Mac - Page 381
Changing Settings in Wired LAN Sheet
View all Canon MAXIFY MB5420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 381 highlights
Changing Settings in Wired LAN Sheet Note • This function is not available depending on the printer you are using. • Enable the wired LAN setting of the printer to change the settings in the Wired LAN sheet. 1. Start up IJ Network Tool. 2. Select printer in Printers:. 3. Click Configuration... button. 4. Click Wired LAN button. 5. Change or check settings. Click OK after changing configuration. A screen is displayed asking you for confirmation before the settings are sent to the printer. If you click OK, the settings are sent to the printer and the Transmitted Settings screen is displayed. 1. TCP/IP Setting: Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your network environment. Get IP address automatically Select this option to use an IP address automatically assigned by a DHCP server. DHCP server functionality must be enabled on your router. Use following IP address Select this option if no DHCP server functionality is available in your setup where you use the printer, or you want to use a fixed IP address. 381