Canon MAXIFY MB5420 MB5400 series PDF User Manual Mac - Page 932

1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 inch / 3 mm (B) in height before printing. This may improve the print result. (C) Print side We recommend feeding paper that has been curled outward one sheet at a time. Check4 Set printer to prevent paper abrasion. Adjusting the setting to prevent paper abrasion will widen the clearance between the print head and the paper. If you notice abrasion even with the media type set correctly to match the paper, set the printer to prevent paper abrasion using the operation panel or the computer. This may reduce the print speed. * Once you have finished printing, undo this setting. Otherwise, it will apply to subsequent print jobs. • From operation panel Press the HOME button, select Setup, Device settings, and Print settings, and then set Prevent paper abrasion to ON. Changing Settings from Operation Panel • From computer ◦ For Windows: Open the printer driver setup window, select Custom Settings in Maintenance sheet, select Prevent paper abrasion check box, and then click OK. To open the printer driver setup window, see How to Open the Printer Driver Setup Window. 932