Canon PowerShot S10 Software Starter Guide - Page 47
Connecting to a Serial Port Printer or Modem Port
View all Canon PowerShot S10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Connecting to a Serial Port (Printer or Modem Port) 1. Shut down the computer and turn the camera's mode dial to the Off position. 2. Attach the supplied Macintosh cable to the printer or modem port on the computer and to the camera's DIGITAL terminal as shown below. • Please consult your computer's manual for the port locations. Printer Port Modem Port Macintosh Cable Macintosh Cable 3. Turn on the computer. DIGITAL Terminal 1. Open the DIGITAL terminal cover by slipping a fingernail under the top edge and pulling down. 2. Insert the cable so that the marks on the cable and camera align. Precaution for Unplugging Cables from the DIGITAL Terminal Always press the [PUSH] button on the connector to detach the cable from the camera's DIGITAL terminal. PUSH Button Macintosh 43