Canon ZR700 ZR700 ZR600 Instruction Manual - Page 118
Troubleshooting
UPC - 013803063691
View all Canon ZR700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Troubleshooting If you have a problem with your camcorder, refer to this checklist. Consult your dealer or a Canon Service Center if the problem persists. Power Source Problem Camcorder will not turn on. The camcorder switches off by itself. Cassette compartment will not open. Cassette compartment stopped during loading/ unloading. LCD/viewfinder switches on and off. Battery pack will not charge. Cause Solution Battery pack is exhausted. Replace or charge the battery 14 pack. Battery pack is not correctly Attach the battery pack 14 attached. correctly. Battery pack is exhausted. Replace or charge the battery 14 pack. Power save function has Turn on the camcorder. 24 been activated. Battery pack is exhausted. Replace or charge the battery 14 pack. Cassette compartment cover Open the cassette 17 is not fully open. compartment cover fully. Battery pack is exhausted. Replace or charge the battery 14 pack. The camcorder malfunctions. Consult a Canon Service - Center. Battery pack is exhausted. Replace or charge the battery 14 pack. Battery packs will not charge Charge the battery pack in - outside the temperature temperatures between 0 °C range of 0 °C and 40°C (32 and 40 °C (32 °F and 104 °F). °F and 104 °F). Battery packs become hot Wait until the battery pack - with use and may not charge. temperature is below 40 °C (104 °F) and retry charging. The battery pack is damaged. Use a different battery pack. - Recording/Playback Problem Cause Solution Buttons will not work. Camcorder is not turned on. Turn on the camcorder. 23 Cassette is not loaded. Load a cassette. 17 " " flashes on the screen. Cassette is not loaded. Load a cassette. 17 " " flashes on the screen. Battery pack is exhausted. Replace or charge the battery 14 pack. " " flashes on the screen. Condensation is detected. See reference page. 113 "REMOVE THE CASSETTE" Camcorder stopped operating Unload and reload the 17 appears on the screen. to protect the tape. cassette. The wireless controller will not [WL.REMOTE] is set to work. [OFF ]. Set [WL.REMOTE] to [ON]. 67 The battery of the wireless Replace the battery. 19 controller is exhausted. 118