Canon ZR700 ZR700 ZR600 Instruction Manual - Page 119
Recording
UPC - 013803063691
View all Canon ZR700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Recording Problem Cause Solution Image will not appear on the Camcorder is not set to screen. mode. Set the camcorder to mode. 23 E "SET THE TIME ZONE, Time zone, date and time are Set the time zone, date and 21 DATE AND TIME" appears on not set. time. the screen. Backup battery is exhausted. Replace the backup battery 16 and reset the time zone, date and time. Backup battery is inserted the Insert the backup battery with 16 wrong way. the + side facing outward and set the time zone, date and time. Pressing the start/stop button Camcorder is turned off. Turn on the power. 23 will not start recording. Cassette is not loaded. Load a cassette. 17 Tape reached the end Rewind the tape or replace 17 (" END" flashes on the the cassette. screen). Cassette is protected (" " Change the position of the 116 flashes on the screen). protect switch. Camcorder is set to a mode Set the camcorder to 23 other than the mode. mode. Camcorder will not focus. Autofocus does not work on Focus manually. 46 that subject. Viewfinder is not adjusted. Adjust the viewfinder with the 18 dioptric adjustment lever. Lens is dirty. Clean the lens. 112 A vertical light bar appears on Bright light in a dark scene - the screen. may cause a vertical light bar (smear) to appear. This is not - - - a malfunction. Viewfinder picture is blurred. Viewfinder is not adjusted. Adjust the viewfinder with the 18 dioptric adjustment lever. Sound is distorted or When recording near loud - recorded in a lower volume sound (such as fireworks, than the actual volume. drums or concerts), sound may become distorted or may - - - not be recorded in the actual sound level. This is not a malfunction. Additional Information 119