Canon imageCLASS 2300N Basic Guide for imageCLASS 2300 - Page 41

Feeder Place a stack of originals in the feeder, and press [Start]. The machine automatically scans them. You can place the following originals in the original supply tray: Item Specifications 2 Weight 10 to 32 lb bond (37 to 128 g/m2) Place very thin originals 10 to 14 lb bond (37 to 51 g/m2), or very thick originals 28 to 32 lb bond (105 to 128 g/m2) into the feeder one at a time. Documents Size 11" x 17" , LGL , LTR , LTR , or STMT . Tray Capacity 50 sheets (LTR or smaller) 25 sheets (LGL or larger) IMPORTANT Do not place the following types of originals in the feeder: - Originals with tears or large binding holes - Severely curled originals or originals with sharp folds - Clipped or stapled originals - Carbon backed paper or other originals that might not feed smoothly - Transparencies and other highly transparent originals Avoid scanning the same original using the feeder more than approximately 30 times. Scanning the same original repeatedly may result in the original becoming folded or torn, which in turn could cause a paper jam. If the feeder rollers are dirty from scanning an original written in pencil, perform the feeder cleaning procedure. (See Chapter 6, "Routine Maintenance," in the Reference Guide.) 1 Neatly place your originals face up in the original supply tray. If you are enlarging LTR originals to 11" x 17" or LGL paper, place your originals horizontally. 2-6 Placing Originals (For Copying, Faxing, Scanning)