Canon imageCLASS 2300N Basic Guide for imageCLASS 2300 - Page 63
When scanning is complete, remove your original., If you have set Department ID Management
View all Canon imageCLASS 2300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
G If you want to cancel a copy job in the standby mode: Stop ❑ Press [Stop]. The display for selecting a copy job to cancel appears. F2 F3 F4 4 Interrupt ❑ Press [F2] (M) or [F3] (L) to select the copy job you want to cancel © press [F4] (CANCEL). The selected job is canceled. NOTE After pressing (Stop), several copies may continue to print out. You can also cancel a copy job from the System Monitor screen. (See Chapter 1, "Introduction to Copying," in the Copying Guide.) G If you want to interrupt a copy job: ❑ To interrupt a copy job when you need to make priority copies, press [Interrupt]. For instructions on interrupting a copy job, see Chapter 1, "Introduction to Copying," in the Copying Guide. The message appears on the LCD display. Copying - Basic Operations Start ID G If you want to reserve a copy job and scan an original while the machine is printing: ❑ Place your original © press [Start]. For instructions on reserving a copy job, see Chapter 1, "Introduction to Copying," in the Copying Guide. 8 When scanning is complete, remove your original. 9 If you have set Department ID Management, press [ID]. For instructions on using Department ID Management, see Chapter 5, "System Manager Settings," in the Reference Guide. 4-8 Copy Operations