Cisco AIR-BR350-E-K9 Hardware Installation Guide - Page 44

Default Basic Settings

Get Cisco AIR-BR350-E-K9 PDF manuals and user guides View all Cisco AIR-BR350-E-K9 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Default Basic Settings Chapter 3 Basic Configuration Step 14 Step 15 Step 16 Press sn and then press Enter to select SNMP Admin. Community. Enter an SNMP community name. This name automatically appears in the list of users authorized to view and make changes to the bridge's management system. Press Enter when you have completed your entry. You can define other SNMP communities with User Management. The "Security Setup" section in Chapter 3 of the Cisco Aironet 350 Series Bridge Software Configuration Guide describes User Management. Press ap and press Enter to apply your basic settings. If you changed the Role in Radio Network setting, your bridge reboots. Close your Telnet session by closing the Telnet window. Default Basic Settings Table 3-2 lists the default settings on the bridge's Express Setup page. Table 3-2 Default Settings on the Express Setup Page Setting Name Default Value System Name AIR-BR350_xxxxxx (the last six characters of the unit's MAC address) Terminal Type (Console interface only) teletype Config Server Protocol DHCP IP address 10.0.0.1 IP Subnet Mask 255.255.255.0 Default Gateway 255.255.255.255 SSID tsunami Role in Radio Network Root Bridge Optimize Radio Network For Throughput Ensure Compatibility With (not configured) SNMP Admin. Community (not configured) 3-16 Cisco Aironet 350 Series Bridge Hardware Installation Guide OL-1412-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
3-16
Cisco Aironet 350 Series Bridge Hardware Installation Guide
OL-1412-01
Chapter 3
Basic Configuration
Default Basic Settings
Step 14
Press
sn
and then press
Enter
to select SNMP Admin. Community. Enter an SNMP community name.
This name automatically appears in the list of users authorized to view and make changes to the bridge’s
management system. Press
Enter
when you have completed your entry.
You can define other SNMP communities with User Management. The “Security Setup” section in
Chapter 3 of the
Cisco Aironet 350 Series Bridge Software Configuration Guide
describes User
Management.
Step 15
Press
ap
and press
Enter
to apply your basic settings. If you changed the Role in Radio Network setting,
your bridge reboots.
Step 16
Close your Telnet session by closing the Telnet window.
Default Basic Settings
Table 3-2
lists the default settings on the bridge’s Express Setup page.
Table 3-2
Default Settings on the Express Setup Page
Setting Name
Default Value
System Name
AIR-BR350_xxxxxx (the last six
characters of the unit’s MAC address)
Terminal Type (Console interface only)
teletype
Config Server Protocol
DHCP
IP address
10.0.0.1
IP Subnet Mask
255.255.255.0
Default Gateway
255.255.255.255
SSID
tsunami
Role in Radio Network
Root Bridge
Optimize Radio Network For
Throughput
Ensure Compatibility With
(not configured)
SNMP Admin. Community
(not configured)