Cisco SRW2024P User Guide - Page 35
VLAN Management > VLAN to Ports, VLAN Management > GVRP - update
UPC - 745883571000
View all Cisco SRW2024P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 5 Advanced Configuration VLAN Management > VLAN to Ports The VLAN to Ports screen contains fields for configuring VLANs to a ports. VLAN Management > GVRP GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to bridge ports mapping, without having to individually configure each bridge and register VLAN membership. VLAN Management > VLAN to Ports Port Displays the interface number. Mode Indicates the port-to-VLAN mode. The possible field values are: •• General Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode). •• Access Indicates the port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled or disabled on an access port. •• Trunk Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can be untagged. Join VLAN Defines the VLANs to which the interface is joined. VLAN to Ports > Join VLAN VLANs Displays the PVID tag. LAG Indicates if the port is a member of a LAG. If it is a member of a LAG, it cannot be configured to a VLAN. The LAG to which it belongs can be configured to a VLAN. VLAN Management > GVRP The Global System LAG information displays the same field information as the ports, but represents the LAG GVRP information. The GVRP screen is divided into two areas, GVRP and GVRP Table. The field definitions for both areas are the same. Enable GVRP Enables and disables GVRP on the device. Interface Displays the interface on which GVRP is enabled. The possible field values are: •• Port Indicates the port number on which GVRP is enabled. •• LAG Indicates the LAG number on which GVRP is enabled. GVRP State Check this checkbox to enable GVRP on the interface. Dynamic VLAN Creation Check this checkbox to enable Dynamic VLAN creation on the interface. GVRP Registration Check this checkbox to enable VLAN registration through GVRP on the device. The Update button adds the configured GVRP setting to the table at the bottom of the screen. WebView Switches 28