Cisco WRVS4400N Administration Guide - Page 107
Tunnel Test, Connect, Config, Trash, Tunnelss Enabled, Tunnels Defined, Username, Status, Start Time
UPC - 745883574797
View all Cisco WRVS4400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring the VPN Settings 5 - Tunnel Test-Click Connect to verify the tunnel status; the test result is updated in the Status column. If the tunnel is connected, you can disconnect the IPSec VPN connection by clicking Disconnect. - Config-Click Edit to change the tunnel's settings. Click Trash to delete all of the tunnel's settings. - Tunnels(s) Enabled-Displays the number of enabled tunnels. - Tunnel(s) Defined-Displays the number of defined tunnels. • VPN Clients Status - No-The range of user number is from 1 to 5. - Username-Displays the username of the VPN Client. - Status-Displays the connection status of the VPN Client. - Start Time-Displays the start time of the most recent VPN session for the specified VPN Client. - End Time-Displays the end time of a VPN session if the VPN Client has disconnected. - Duration-Displays the total connection time of the latest VPN session. - Disconnect-Check the Disconnect box at the end of each row in the VPN Clients Table and click Disconnect to disconnect a VPN Client session. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 107