Cisco WRVS4400N Administration Guide - Page 46

Setting Up and Configuring the WRVS4400N Wireless-N Router Setting Up Your Wireless-N Router 5 • Connect on Demand: Max Idle Time-Configure the router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically reestablish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the Connect on Demand option and enter the number of minutes you want to have elapsed before your Internet connection terminates in the Max Idle Time field. Use this option to minimize your DSL connection time if it is charged based on time. This option is disabled by default. • Keep Alive Redial period-If you select this option, the router periodically checks your Internet connection. If you are disconnected, then the router automatically reestablishes your connection. To use this option, click the option next to Keep Alive. In the Redial Period field, you specify how often you want the router to check the Internet connection. This option is enabled by default and the default Redial Period is 30 seconds. Use this option to minimize your Internet connection response time as it is always connected. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 46