Cisco WRVS4400N Administration Guide - Page 80
Configuring Connection Control, prevent, allow, Wireless > Connection Control, Select SSID - vpn client windows 8 1
UPC - 745883574797
View all Cisco WRVS4400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Setting Up and Configuring the WRVS4400N Wireless-N Router Configuring Wireless Settings 5 Configuring Connection Control The Wireless > Connection Control window displays the Connection Control settings for the router, giving you two ways to control the connection (association) of wireless client devices. You can either prevent specific devices from connecting to the router, or you can allow only specific client devices to connect to the router. The client devices are specified by their MAC addresses. The default is to allow only specific client devices. To configure connection control for the router, follow these steps: STEP 1 Click Wireless > Connection Control STEP 2 Configure the Connection Control List to either permit or block specific wireless client devices connecting to (associating with) the wireless router: • Select SSID-Select the desired SSID. • Enabled/Disabled-Enable or disable wireless connection control. The default is Disabled. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 80