Cisco WRVS4400N Administration Guide - Page 209
Windows 2000 or XP Instructions, For the Router’s Web-based Utility, Start, Enter, ipconfig /all
UPC - 745883574797
View all Cisco WRVS4400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Finding Out MAC and IP Addresses Windows 2000 or XP Instructions D Windows 2000 or XP Instructions STEP 1 Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. STEP 2 At the command prompt, enter ipconfig /all. Then press the Enter key. STEP 3 Write down the Physical Address as shown on your computer screen. It is the MAC address for your Ethernet adapter. This appears as a series of numbers and letters. The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering. For the Router's Web-based Utility For MAC address cloning, enter the MAC Address in the MAC Address field or select Clone My PCs MAC. Click Save Settings to save the MAC Cloning settings or click the Cancel Changes button to undo your changes. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 209