Cisco WRVS4400N Administration Guide - Page 37
Configuring Basic Setup Settings - nat
UPC - 745883574797
View all Cisco WRVS4400N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Setting Up and Configuring the WRVS4400N Wireless-N Router Setting Up Your Wireless-N Router 5 Configuring Basic Setup Settings You can configure the following basic setup settings: • WAN Click Setup > WAN and select the appropriate Internet connection type according to your ISP if connecting your WAN port to the WAN (DSL or cable modem). Otherwise, most cases can use the default setting to get a WAN port IP address from a DHCP server. • Advanced Routing Click Setup > Advanced Routing. If you are connecting the router to the Internet, use the default setting. Otherwise, select Router in the Operation Mode field to disable NAT (Network Address Translation). • Management Click Administration > Management and change the access password for the router's web-based utility. The default username and password are admin. You can also customize the wireless settings: • Wireless Click Wireless > Basic Settings and change the default SSID on the window. Select the level of security in the Wireless > Security Settings window and complete the options for the selected security mode. When the appropriate security mode is configured, disable SSID Broadcast on the Basic Settings window. Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 37