Compaq LTE 5000 Compaq LTE 5000 Family of Personal Computers Beyond Setup - Page 147
Warning Messages
![]() |
View all Compaq LTE 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Message: Description: Message: Description: Message: Description: Message: Description: Message: Description: Message: Description: Message: Description: Message: Description: Message: Description: Message: Description: Message: Description: Warning Messages CLOCK NOT TICKING CORRECTLY The real time-clock is not ticking. CMOS CHECKSUM INVALID - RUN SCU CMOS RAM Information has been corrupted and needs to be reinitialized by running Computer Setup. CMOS FAILURE - RUN SCU CMOS RAM has lost power and needs to be reinitialized by running Computer Setup. COLOR/MONO SWITCH INCORRECT The COLOR/MONO switch on the system board is incorrect for the installed hardware. FLOPPY CONTROLLER FAILED The diskette (floppy) controller failed to respond to the reset command. Turn off the computer and verify that the diskette drive is fully seated in the drive bay. FLOPPY DISK TRACK 0 FAILED The floppy drive cannot read track 0 of the floppy disk in the drive. Try another diskette. If the problem persists, you may need to replace the floppy drive. FLOPPY INFORMATION INVALID - RUN SCU The drive parameters stored in CMOS do not match the floppy drives detected in the system. HARD DISK CONTROLLER ERROR The hard disk controller failed to respond to the reset command. Turn off the computer and verify that the hard drive is fully seated in the drive bay. HARD DISK xx FAILURE (or ERROR) A failure or an error occurred when trying to access the hard drive. HARDWARE INFO DOES NOT MATCH VIDEO CARD - RUN SCU The video adapter type specified in CMOS RAM does not match the installed hardware. KEYBOARD CONTROLLER FAILURE The keyboard failed the self-test command. Continued A-2 Power-On Self-Test Error Messages
![](/manual_guide/products/compaq-lte-5000-compaq-lte-5000-family-personal-computers-setup-634e00e/147.png)