Compaq LTE 5000 Compaq LTE 5000 Family of Personal Computers Beyond Setup - Page 149
Fatal Error Messages
![]() |
View all Compaq LTE 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Message: Description: Beep Code: Message: Description: Beep Code: Message: Description: Beep Code: Message: Description: Beep Code: Message: Description: Beep Code: Message: Description: Beep Code: Message: Description: Beep Code: Message: Description: Beep Code: Fatal Error Messages CMOS RAM TEST FAILED A walking bit test of CMOS RAM locations 0E (Hex) - 3F (Hex) failed. 3 DMA CONTROLLER FAULTY A sequential read/write of the transfer count and transfer address registers within the primary and secondary DMA controllers failed. 4 FAULTY DMA PAGE REGISTERS A walking bit read/write of the 16 DMA controller page registers starting at location 80 Hex failed. 0 FAULTY REFRESH CIRCUIT A continuous read/write test of port 61h found that bit 4 (Refresh Detect) failed to toggle within an allotted amount of time. 1 INTERRUPT CONTROLLER FAILED A sequential read/write of various Interrupt Controller registers failed. 5 PARITY ERROR AT UNKNOWN LOCATION Parity error occurred. None RAM ERROR AT LOCATION xxxx RAM error occurred during memory test. None ROM CHECKSUM INCORRECT A checksum of the ROM BIOS does not match the byte value at F000:FFFF. 2 A-4 Power-On Self-Test Error Messages
![](/manual_guide/products/compaq-lte-5000-compaq-lte-5000-family-personal-computers-setup-634e00e/149.png)