Compaq LTE 5000 Compaq LTE 5000 Family of Personal Computers Beyond Setup - Page 94
Using LTE Elite Hard Drives That, Have Secondary-Drive Capability, Refer
![]() |
View all Compaq LTE 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Hard drives that have secondary-drive capability have the following symbol on the label located on top of the drive: If you have LTE Elite hard drives that do not have secondary-drive capability, you can use them in the LTE 5000 computer with the limitations described later in this section. Using LTE Elite Hard Drives That Have Secondary-Drive Capability You can use LTE Elite hard drives that have secondary-drive capability the same way you would use additional LTE 5000 hard drives. Follow the steps described earlier in this chapter to insert up to three in the computer and expansion base MultiBays. Start (boot) the computer from the original LTE 5000 hard drive in the dedicated hard drive bay. Using LTE Elite Hard Drives That Do Not Have Secondary-Drive Capability LTE Elite hard drives that do not have the secondary-drive capability symbol must be used in the primary drive bay in the computer or MultiBay I in the expansion base. Before beginning one of the procedures to insert the drive, run Computer Setup and ensure that the hard drive boot sequence on the Initialization menu is set to the factory default of: 1. Hard drive in the computer 2. Hard drive in the computer MultiBay 3. Hard drive in the expansion base MultiBay I 4. Hard drive in the expansion base MultiBay II Refer to Chapter 10, "Running Computer Setup," for information about setting up your computer. Working with Removable Drives 6-27
![](/manual_guide/products/compaq-lte-5000-compaq-lte-5000-family-personal-computers-setup-634e00e/94.png)