Compaq dx2810 Service Reference Guide: HP Compaq dx2810 and dx2818 Business PC - Page 48
Access Panel
View all Compaq dx2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Access Panel NOTE: The appearance of the power supply varies based on model. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 37). 2. Loosen the captive thumbscrew (1) that secures the access panel to the computer chassis. 3. Slide the access panel back (2) about 1.3 cm (1/2 inch), then lift it off the unit. NOTE: You may want to lay the computer on its side to install internal parts. Be sure the side with the access panel is facing up. Figure 7-3 Removing the Computer Access Panel NOTE: If the access panel is removed while power is still supplied to the computer, the hood sensor will sound an alarm. If the alarm sounds, unplug the computer and leave it unplugged until the access panel is replaced. To replace the access panel, reverse the removal steps. 38 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis