Compaq dx2810 Service Reference Guide: HP Compaq dx2810 and dx2818 Business PC - Page 78
System Fan
View all Compaq dx2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
System Fan 1. Prepare the computer for disassembly (Preparation for Disassembly on page 37). 2. Remove the access panel (Access Panel on page 38). 3. Lay the computer on its side with the rear facing toward you. 4. Disconnect the cable that connects the system fan to the system board. 5. Remove the four Phillips screws that secure the fan to the chassis, rotate the top of the fan forward, and then remove the fan from the chassis. NOTE: The appearance of the power supply varies based on model. To install the fan, reverse the removal procedures. 68 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
System Fan
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
37
).
2.
Remove the access panel (
Access Panel
on page
38
).
3.
Lay the computer on its side with the rear facing toward you.
4.
Disconnect the cable that connects the system fan to the system board.
5.
Remove the four Phillips screws that secure the fan to the chassis, rotate the top of the fan forward,
and then remove the fan from the chassis.
NOTE:
The appearance of the power supply varies based on model.
To install the fan, reverse the removal procedures.
68
Chapter 7
Removal and Replacement Procedures Microtower (MT) Chassis