Compaq dx2810 Service Reference Guide: HP Compaq dx2810 and dx2818 Business PC - Page 96
Preparation for Disassembly, on Access Panel, Front Bezel
View all Compaq dx2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Bezel Blanks 1. Prepare the computer for disassembly (Preparation for Disassembly on page 83). 2. Remove the access panel (Access Panel on page 84). 3. Remove the front bezel (Front Bezel on page 85). 4. While facing the inside of the front bezel, press the two retaining tabs on the right towards the outer edge of the bezel (1) and pull the bezel blank inwards to remove it (2). Figure 8-3 Removing a Bezel Blank 86 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Bezel Blanks
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
83
).
2.
Remove the access panel (
Access Panel
on page
84
).
3.
Remove the front bezel (
Front Bezel
on page
85
).
4.
While facing the inside of the front bezel, press the two retaining tabs on the right towards the outer
edge of the bezel
(1)
and pull the bezel blank inwards to remove it
(2)
.
Figure 8-3
Removing a Bezel Blank
86
Chapter 8
Removal and Replacement Procedures Small Form Factor (SFF) Chassis