Compaq dx2810 Service Reference Guide: HP Compaq dx2810 and dx2818 Business PC - Page 99
Drives, Drive Positions,
View all Compaq dx2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Drives A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive. Drive Positions Figure 8-4 Drive Positions 1 3.5-inch external drive bay for optional drive (diskette drive shown) 2 3.5-inch internal hard drive bay 3 5.25-inch external drive bay for optional drive (optical drive shown) To verify the type, size, and capacity of the storage devices installed in the computer, run Computer Setup. Refer to the Computer Setup (F10) Utility Guide for more information. Drives 89
Drives
A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive.
Drive Positions
Figure 8-4
Drive Positions
1
3.5-inch external drive bay for optional drive (diskette drive
shown)
2
3.5-inch internal hard drive bay
3
5.25-inch external drive bay for optional drive (optical drive
shown)
To verify the type, size, and capacity of the storage devices installed in the computer, run Computer
Setup. Refer to the
Computer Setup (F10) Utility Guide
for more information.
Drives
89