Compaq dx7500 Service Reference Guide: HP Compaq dx7500 Business PC - Page 120
Compaq dx7500 - Microtower PC Manual
![]() |
View all Compaq dx7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
9. Push in the latch holding the drive cage upright (1) and lower the drive cage all the way down (2). Figure 8-21 Lowering the Drive Cage 10. Connect the appropriate drive cables: a. If installing a diskette drive, connect the power and data cables to the rear of the drive and connect the other end of the data cable to the connector on the system board labeled FLOPPY. b. If installing a media card reader, connect the USB cable from the media card reader to the USB connector on the system board labeled F_USB2. NOTE: Refer to System Board Drive Connections on page 100 for an illustration of the system board drive connectors. 11. Replace the front bezel and access panel. 12. Reconnect the power cord and turn on the computer. 13. Lock any security devices that were disengaged when the access panel was removed. 110 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
![](/manual_guide/products/compaq-dx7500-service-reference-guide-hp-compaq-dx7500-business-pc-72345e2/120.png)